Vial Insert, 6mm Clear Glass Insert Conical Base, Volume 250ul, Pack of 100.
NEVER exceed the upper or lower limits of these pipettes. The limits are: P10: 1.0 - 10.0 µl. P20: 2.0 - 20.0 µl. P200: 20 - 200 µl.
Shop Aijiren Technologies INSERT,250UL, GLASS, 100/PK at Aijiren Techsci.com. Vial insert, 250 µL, deactivated glass with polymer feet, 100/pk Insert size: ...
. Vial insert, 250 µL, glass with polymer feet, 100/pk Insert size: 5.6 x 30 mm.
Aijiren Vial insert, 300 uL, polypropylene, polymer feet. Do not fill to more than 250 uL, 100/pk Insert size: 5.6 x 30 mm - High Recovery Vials
For example, if I have 83 µl in my microvolume insert and it is doing 80 µl You should NEVER have an empty or near empty vial after injection.
Vial Insert, 250 uL, Glass, conical with Polymer feet, 100/pk: Amazon.com: Industrial & Scientific.
Vial Inserts 250ul Glass BM w/Bottom Spring Pack of 100. *Big Mouth insert w/glass flange (Step design) not to be used with 9 mm screw-thread vials.
used for plates and glass inserts. 250 uL. ANSI-. 384-well. 100 µL. 96-Well Glass Inserts ... Ordering online has never been easier or more secure!
250ul Clear Insert with bottom spring, 6x29. Product Category: Chromatography Vials; Inner Package Size: 100; Type: Insert with bottom spring; Finish: 6x29
Never exceed the upper or lower limits of these pipettors. Depress the plunger until you feel the initial resistance and insert tip into the solution, ...
I'm gonna try what you said to me about the 200-250uL. But am I sure saying that the problem is in the ligation? Because I did an experiment with my
250UL One-Piece Tire Repairs Completely Seal Punctures for a Safe Fix Following Industry You Never Want to Hear This Noise in Your Car.
Vial Insert, 250 uL, Glass, conical with Polymer feet, deactivated, 100/pk: Amazon.com: Industrial & Scientific.
Suits for 9mm Vials, 250uL. Micro-Insert with Mandrel Interior, & Polymer Feet, 29*5.7mm, Suits for 9mm Vials, 0.3mL. Clear PP Short Screw Micro-Vial,