Depending on use or preference, this type of vial can be plastic, glass or both (i.e. plastic but sample insert is glass) and the insert can be attached or
Chromatography caps/septa ; W0900-1950-ST, ESS, 9mm Bonded screw cap/white septa, 100, $13.82 ; R -1950-CT, ESS, 11mm Crimp top cap/red septa, 100, $9.15
33-Expansion clear glass (USP Type 1 borosilicate, Class A) and 51A-Expansion amber glass easy, affordable way to order matching vials, caps, and septa, ...
N 9 as bonded polymagnetic closure for safe penetration (septum is firmly connected with the cap). Hard and soft snap ring caps N 11 for HPLC.
Vial Kits for chromatography provide convenience in ordering and managing AQ™ glass vials and pre-slit Silicone / PTFE septa bonded in 9mm screw caps ...
If siloxanes contaminate a sample during gas chromatography (GC) or liquid Stand-alone septa is not fitted or bonded to caps for EPA/VOA vials.
The vials, caps, and septa that come in contact with the sample are a Vials – Only Type 1 borosilicate glass is used to make Low Adsorption products.
Vials, vial inserts, septa, and caps/closures with or without septa for use with autosamplers and autosampler vials; includes a variety of sizes,
In order to avoid that the unslit septum is pushed into the vial by the needle, you use a bonded closure with unslit septum. Cap colors – used for marking
Glass quality • Dimension accuracy • Cap/Septa specifications. • Full chemical test by HPLC and GC. Mass Spec Certification - Our MS Certified Vial Kits
Manufacturer of Chromatography Vials - 1.8mL Glass Vial Clear, with 9mm Blue Screw Cap, Aluminium Cap with Head Space Septa, Clear Micro-Insert Vial and
10-425 Polypropylene Screw Thread Closures ; 0016123, PTFE/White Silicone w/slit Bonded), PP ; 0016125, PTFE/Red Rubber, PP ; 0016126, Red PTFE/White Silicone (
Safeguard your samples in a chemically inert environment with the Clear Glass 12 x 32 mm Screw Neck Vial with Cap and Preslit PTFE/Silicone Septum.
11 09 0620 – 1.1ml Clear glass High recovery Vials for HPLC application + 09 04 1534 – 9mm PP bonded cap with Silicone/PTFE pre slit septa, 100/pk.
All vials undeactivated unless otherwise noted. Caps and Septa for 2.0 mL, 8 mm Screw-Thread Vials. *Amber plastic vial with clear glass insert available