Case
Sample prep PTFE filter vials for analysis gvs GVS™ SEPARA™ 32 mm Syringeless Filter Vial Rapid sample preparation. Filtering with a plunger in the vial is a rapid single step, reducing sample loss. After filtration, the sample is ready for use Send Email Chat Now
Replaces in the Lab · Centrifugation & Spin Filters · Small Volume Syringe Filters · Syringes · High Recovery Vials/Caps · Inserts with HPLC Vials/Caps Get Price Filter Vials — - Chrom4
DX PTFE Low Evap Filter Vial, 0.22um, 100/unit. Low Evaporation Filter Vial Filtrous low evaporation filter vial eliminates the pre-slit cap membrane, minimizing sample evaporation to a rate of <0.4% over a 24-hour period. These filter vials boast the same features as our standard
1224103, GVS Syringe Filter, Nylon (N66), 0.1µm, 30mm, Non . GVS Filter Technology Syringe FilterNylon Syringe Filter (Non-Sterile)0.1µm Pore Size, 30mm Membrane Diameter, (500/pk)30 mm - Cameo Syringe FiltersBenefits:Increased throughput and speed of sample preparation.Lower hold-up volume due to an improved flow channel design and reduced spacing between the supports within the housing for
DX PTFE Low Evap Filter Vial, 0.22um, 100/unit - Filtrous Minimize sample evaporation and eliminate the need for syringe filters, syringes, HPLC vials and caps. In stock and available for same day shipping.
MSE Supplies is an authorized distributor of GVS Save time and money in the sample preparation process with the GVS Separa® Filter Vial. Separa® is a one-step sample preparation device that allows a quick, effective, and simple to use process integrating a self-sampling system, membrane, cap, and lid with precut septa.
Separa® is a one-step sample preparation device that allows a quick, effective, Streamlines syringeless filtration; Designed for Separa® vials Get Price SEPARA Syringeless Filter Vials, 0.20µm, PTFE, Pink, 100/CS
Rapid sample preparation. Filtering with a plunger in the vial is a rapid single step, reducing sample loss. After filtration, the sample is ready for use in auto-sampling robot. The pre-slit cap ensures easy and clean transfer of sample. Compatible with most standard auto-Samplers.
Sample prep PTFE filter vials for analysis gvs-HPLC Vials Supplier GVS™ SEPARA™ 32 mm Syringeless Filter VialRapid sample preparation. Filtering with a plunger in the vial is a rapid single step, reducing sample loss. After filtration, the sample Mob: 8618057059123 market@aijirenvial.com Home
Save time and money in the sample preparation process with the GVS Separa® Filter Vial. Separa® is a one-step sample preparation device that allows a quick, effective, and simple to use process integrating a self-sampling system, membrane, cap, and lid with precut septa. The liquid is placed in the outer vial and dispensed by pressing the inner insert so that it is pushed through the membrane.
Jul 23, 2019 · GVS Filter Technology, Separa Syringeless Filter Vial, PTFE Membrane, 0.45µm, 100/pk $14750 ($14.75 /10 Items) & FREE Returns Size: 0.45µm Very Low sample volume Filter Organic-based HPLC Samples Faster HPLC Filtration Time High Throughput Compatible with auto samplers Product Specifications See more Specification for this product family
Refer to the solvent compatibility table for a complete list of recommended solvents. Use in any HPLC or GC autosampler rack that accepts 12x32mm 2mL vials. Needle stroke must be set to 5mm from the bottom of the vial. Requires a minimum sample volume of 250 uL, maximum sample fill volume 450 uL, filter dead volume 120 uL. Replacement for 220
Jul 23, 2019 · Step up your sample preparation with SEPARA syringeless filter vials from GVS Life Sciences. SEPARA integrates the following into one single device: auto-sampler vial, filtration membrane, plunger, and cap/septa . Save money – Eliminate the need for separate syringes, syringe filters, vials and septa, reducing sample preparation costs by 50%
GVS Laminated PTFE filters are made of a polytetrafluoroethylene polymer (PTFE) laminated to a polypropylene support for improved durability and easy handling. These filters are chemically compatible with strong acids and most aggressive solvents such as alcohols. PTFE (fine powder resin) is expanded into a 3-dimensional web-like structure
Sample filtration for superior HPLC performance. consumables are cut out of the sample preparation process. Furthermore, Mini-UniPrep is designed to be used with the most standard automated systems. The vial shape fits easily into autosamplers and the slit septum cap version is suitable even for HPLC instruments with sensitive needles.