Case
Chromatography & HPLC Autosampler Vials; Chromatography & HPLC Autosampler Vials, 10mm, No
Zoom Image. 72944. Kinesis. Screw neck vials and screw caps ensure a tight seal. Made from high-quality Type I Class 51 expansion borosilicate glass. MORE + LESS -. $ 204.00 - $ 233.00USD / Pkg of 1000. 3 variations of this product are available. See All Product Options Below.
Made of borosilicate glass to reduce pH changes and contaminants potentially leached from soda lime glass. These disposable borosilicate glass tubes are perfect for tissue culture and clinical chemistry applications. 10 and 12mm O.D. sizes are available. Packaged in shrink-wrapped trays of 125 or 250 to prevent contamination or breakage.
Length 200mm. Diameter 10mm. Socket 14/23. Description. Specifications. Description. These chromatography columns are supplied with PTFE Rotaflo stopcocks for fine control of eluent flow. They are manufactured from chemically resistant borosilicate glass. Sintered disc porosity 0 and ground glass socket.
clear glass vials are Type 1, 33-expansion glass. Type 1, 51-Expansion Glass More alkaline than 33-expansion glass and is adequate for many laboratory uses. It has an expansion coefficient of 51x10–7 ˚C and is composed primarily of silicon and oxygen, with trace amounts of boron. All Aijiren Technology amber glassware is Type 1, 51-expansion glass.
Description. Choose from these Aijiren Tech™ 10mm Clear Glass Wide Opening Screw Thread Vials that are manufactured from clear, (Type 1 Class A) glass and have a 10-425 thread finish. Obtain maximum recovery of critical polar, labile or OH-interacting compounds using silanized (deactivated) glass (optional) See the Aijiren Tech Columns and Consumables Catalog for autosampler compatibility.
10mm chromatography vial septa with screw cap VWR-Aijiren. Glass Vial With Screw Caps at Thomas Scientifictop caps (9711B25, B55) Borosilicate glass Consists of screw-necked vials and 9711C10 series open-top screw caps. Septa are not supp Material: USP Type 1, Class A, 33 Borosilicate Glass Volume: 2ml (standard. Send Inquiry Chat Now.
Mar 16, 2022 · Results 1 - 24 of 1000+ 2mL HPLC Autosampler Vials 9-425 Clear, with Writing Area, 9mm Blue Cap with pre-Slit PTFE and Silicone Septa [100pcs/pk](2ml Vial (with
HPLC & Chromatography Vials - 10mm. High quality products. Huge selection. Order online, call, or request a quote. Large selection of cap sizes, colors, materials, and sizes. Expert advice. Samples . HPLC & Chromatography Vials - 10mm - No
Ace Glass. Large chromatography columns with o-ring grooved flat flanged tops and Ace-Thred bottoms. Column extenders and 5860 heads should be mated to columns with our 6517 series clamps. All columns and extenders are supplied with either a 7855-254 (4") or 7855-260 (6") silicone o-ring. For capfe o-rings,.
Choose from this selection of chemically inert polypropylene vials that are suitable for most chromatography applications. These 10mm plastic screw thread vials provide an economical alternative to glass for some applications. They are manufactured from high-quality, GC-tested polypropylene material and feature a 10-425 finish.
Aijiren Techbrand 10mm wide opening screw thread vials with 2 mL, 12x32mm 10mm wide opening screw thread Vials and inserts that feature: · 10-425 thread finish. · I-D vials feature a write-on patch with graduation for convenient sample identification. · Wide neck opening design, allows easy filling, requires Micro-Inserts with a diameter of 6mm.
Aijiren 2ml 10mm chromatography amber vials are constructed from Type 1 borosilicate glass, with low metal content, to protect your sample from destabilizing or leaching. The associated 2ml 10mm chromatography amber vials and closures come with your choice of septa constructed from either PTFE silicone or natural red rubber. Vial Dimension: 11.6*32mm
Chromatography Sizes. Vials come in a variety of sizes to suit many needs. Standard sizes include 12x32mm (2mL), 15x45mm (4mL) and 8x40mm (1mL). Users may also choose vials with a normal (4 mm) mouth opening or wide (6 mm) mouth opening depending upon the cap type to be chosen. Important also is whether your sample is handled via Robotic Arm